2005 VOORWOOD L79 BH DOUBLE SIDED FOILER

VOORWOOD L79BH DOUBLE SIDED FOILER

Voorwood L79 Foiler

VOORWOOD MODEL L79B END FINISHER

The End Finisher precisely cuts to length, and then sands both ends of MDF parts to remove the protruding fibers, which prepares the surface for finishing.  The transfer finish is then applied completing the one-pass process.

The positive feed system ensures accurate machining and finishing.  As parts are fed past the workstations, they are clamped securely between the bottom lugged chain and the top holddown belt.

The frame is of rigid steel construction.  Specially selected alloy steels are used throughout.  Rotating components are dynamically balanced and electronically tested for vibration after final assembly.

An applicator wheel with automatic heat control applies the transfer finish.  The End Finisher is a production-oriented machine designed for reliability and operator convenience.  Set-up time is kept to a minimum by many special Voorwood features.

PART SPECIFICATIONS

(1) Will foil a 1-7/8 inches face width.

(2) Up to 8-1/2 inches wide.

(3)  Length: 6 inch minimum to 80 inch maximum.

FEED

(1) Feed system operates at a variable speed of 0-10.5 fpm.

(2) 1-1/2 hp drive

(3) Feed height: 35 inches

(4) Holddowns:  Endless belt

(5) Bottom chain with “pop-up” lugs, lug to lug spacing is 3 inches (7.62 cm). Maximum part width between lugs is 1” (2.54 cm).

SCORING, BOTTOM

(1) Single high-speed arbors.  Accepts 4-inch diameter blade.

(2) ¾ hp motor rotates arbor at 5000 rpm.

(3) Fully adjustable

SPECIFICATIONS: VOORWOOD MODEL L79B END FINISHER

COPE HEAD

(1) High-speed 1-1/4 inch diameter spindle with double collet feature holds cope head securely.

(2) Five (5) hp motor drives spindle at 3450 rpm.

(3) Cope spindle assembly has fine adjustment for precision alignment.

SHAPING

(1) Spindle accepts Voorwood shaping heads.

(2) Furnished with 1-1/4 inch diameter spindle with double collets.

(3) Five (5) hp motor drives spindle at 3425 rpm.

(4) Shaper spindle assembly has fine horizontal adjustment for precision alignment.

SANDING

(1) Spindle accepts special Voorwood sanding heads with replaceable abrasive refills.

(2) Furnished with 1-1/4 inch diameter spindle with double collets for sanding heads.

(3) One (1) hp motor drives spindle at 1750 rpm.

(4) Sander spindle assembly has fine horizontal adjustment for precision alignment.

FOILING

Supply Roll:

Maximum Diameter:                     13 inches (330mm)

Maximum Width:                          2-1/2 inches

Core Diameter:                             3 inches (76mm)

Applicator Stations:                     (a) Each side furnished with one station.

                                                      (b) One 5-inch diameter applicator wheel is required for each side.                           (not furnished)

                                                   

Film Take-up:                               Carrier film rewinds with automatic tension control. Stripper rollers for precision trimming on edges.

CONTROL PANEL

(a) Lighted push button displays                 (f)    Cope on

(b) Master stop                                             (g)   Shaper on

(c) Feed on                                                    (h)   Sander on

(d) Run/jog                                                    (i)    Finish on

(e) Score saw on                                            (j)    Machine activate

SERVICES REQUIRED

        Electric:                      

                                                440/480 volt, 3 phase, 60 hz, 45 amps

        Dust collection:        Hoods furnished for connection to customer’s dust collection system. Requires velocity of 4000 fpm, static pressure of one inch water and 1500 cfm.

SPACE REQUIREMENTS 

151 inches x 91 inches

APPROXIMATE SHIPPING WEIGHT    

3500 lbs.

TOOLING AND ACCESSORIES

  • Score saws (2 required)                                                                      
  • Cope heads (2 required)
  • Shaping Heads (2 required)                                                                         
  • Sanding Heads (2 required)                                                                         

Finisher applicator wheels (2 required)

Call Justin 1-800-519-7147 ext. 101 to inspect the Voorwood L79 Foiler

No comments yet.

(will not be published)
Leave this field empty: